UASTA: Difference between revisions
From Rsewiki
(Created page with " == Installations == ... == Usage == ...") |
(→Usage) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
== Usage == | == Usage == | ||
... | === uASTA with Loco Positioning System (ultra-wide band) === | ||
[[File:Intro to uasta thumbnail.png|200px|thumb|left|[[https://youtu.be/cjsaF6WJqHI https://youtu.be/cjsaF6WJqHI]]]] | |||
N = number that identifies your Crazyflie | |||
* Startup your Crazyflie while facing the x direction | |||
* Start a ROS server for your Crazyflie: | |||
<code> cfstart N </code> | |||
* Check the current level of the battery (it should be above 3.8): | |||
<code> battery </code> | |||
* Check that the position estimate is stable in RViZ: | |||
<code> rviz </code> | |||
* Run you code in Simulink | |||
=== uASTA with Optitrack (motion capture system) === | |||
N = number that identifies your Crazyflie | |||
* Startup your Crazyflie while facing the x direction | |||
* Start a ROS server for your Crazyflie: | |||
<code> cfstart N </code> | |||
* Check the current level of the battery (it should be above 3.8): | |||
<code> battery </code> | |||
* Start an Optitrack server for you Crazyflie: | |||
<code> optitrack N </code> | |||
Troubleshooting: the markers mounted on your Crazyflied have to be registered as a rigid body called cfN (e.g., cf12) on the Optitrack computer in the central cabin. See [[ASTA_motion_capture]] for more information. | |||
* Check that the position estimate is stable in RViZ: | |||
<code> rviz </code> | |||
* Run you code in Simulink | |||
Latest revision as of 18:31, 15 June 2021
Installations
...
Usage
uASTA with Loco Positioning System (ultra-wide band)
N = number that identifies your Crazyflie
- Startup your Crazyflie while facing the x direction
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink
uASTA with Optitrack (motion capture system)
N = number that identifies your Crazyflie
- Startup your Crazyflie while facing the x direction
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Start an Optitrack server for you Crazyflie:
optitrack N
Troubleshooting: the markers mounted on your Crazyflied have to be registered as a rigid body called cfN (e.g., cf12) on the Optitrack computer in the central cabin. See ASTA_motion_capture for more information.
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink
