Robobot: Difference between revisions

From Rsewiki
No edit summary
No edit summary
Line 4: Line 4:
[[File:onshape-view.png|400px]] [[File:camera_placement.png|800px]]
[[File:onshape-view.png|400px]] [[File:camera_placement.png|800px]]


Figure 1. Robobot drawing (V4), all distances in mm (front wheel not in right place, servo turns the other way) - see drawing https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 .
Figure 1. Robobot drawing (V4), all distances in mm (front wheel not in right place, as the turn servo is turned the other way) - see drawing https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 .


==Getting started==
==Getting started==
Line 32: Line 32:
== Hardware ==
== Hardware ==


The Robobot frame is 3D printed, the design is in onshape - see this link https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130  
The Robobot frame is 3D printed, the design is in onshape - see this link https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130, in the list of parts to the left it is possible to export (right-click) as STL files, that you can slice for your 3D printer.


The remaining hardware is  
The remaining hardware (mostly electronics) is described (to be) on the on the [[Robobot Hardware}} page.


==Status==
==Status==


Se status for robotter sammen med regbot status: [[REGBOT_robot_status#Robobot]].
Se status for robotter sammen med regbot status: [[REGBOT_robot_status#Robobot]].

Revision as of 16:04, 6 January 2018

This page is for ROBOBOT, an extension of REGBOT with a raspberry pi and three wheels.

File:Camera placement.png

Figure 1. Robobot drawing (V4), all distances in mm (front wheel not in right place, as the turn servo is turned the other way) - see drawing https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130 .

Getting started

This section contains a quick-start guide for the user. It includes how to get the robot connected to Eduroam WiFi for easy access, an explanation of software and software structure and present a few examples to get the robots driving. Press the link below to go to the instructions page.

Instructions for getting started

Full installation instructions

This section contains the complete instructions for setting up a clean Raspberry Pi.

Click on the link below to go the instructions.

Full installation instructions

Setup issues

A number of parameters in the REGBOT part of the robot needs setting.

Some suggestions are provided here:

Regbot settings

Hardware

The Robobot frame is 3D printed, the design is in onshape - see this link https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130, in the list of parts to the left it is possible to export (right-click) as STL files, that you can slice for your 3D printer.

The remaining hardware (mostly electronics) is described (to be) on the on the [[Robobot Hardware}} page.

Status

Se status for robotter sammen med regbot status: REGBOT_robot_status#Robobot.