Terrain hopper steering: Difference between revisions
From Rsewiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
[[File:off-the-shelf-parts.png | 600px]] | [[File:off-the-shelf-parts.png | 600px]] | ||
Figure 1. New steering part maintaining original steering axle position, but | |||
replacing with bearings and a belt drive to a maxon gear motor. | |||
This figure points to most of the off-the-shelf parts used. | |||
And the parts that need a bit of manufactoring | And the parts that need a bit of manufactoring | ||
[[File:modified-parts.png | 800px]] | [[File:modified-parts.png | 800px]] | ||
Figure 2. New steering part maintaining original steering axle position, but | |||
replacing with bearings and a belt drive to a maxon gear motor. | |||
This figure points to most of the parts that needs workshop assistance. | |||
Most of the parts - except axlesl (7 and 8) - can be manufactored on own workshop. The axles will be manufactored by axle supplier. | |||
Revision as of 13:30, 9 January 2019
Overview of new steering proposal
Figure 1. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the off-the-shelf parts used.
And the parts that need a bit of manufactoring
Figure 2. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the parts that needs workshop assistance. Most of the parts - except axlesl (7 and 8) - can be manufactored on own workshop. The axles will be manufactored by axle supplier.
