Drone motor test app: Difference between revisions
From Rsewiki
(Created page with "back to Drone control == Motor test app== A motor test GUI is available (in the motortest_gui directory) - it will talk to the motortest firmware - and there is no need ...") |
No edit summary |
||
| Line 1: | Line 1: | ||
back to [[Drone control]] | back to [[Drone control]] | ||
== Configuration and test app == | |||
The app is intended to configure, measure and test the drone (inner) flight-controller. | |||
It is written with Qt5 and python | |||
It runs with python 2.7++ and version 3. | |||
Software is part of mobotware using the name 'drone_ctrl'. | |||
== Motor test app== | == Motor test app== | ||
Revision as of 11:06, 28 October 2020
back to Drone control
Configuration and test app
The app is intended to configure, measure and test the drone (inner) flight-controller.
It is written with Qt5 and python
It runs with python 2.7++ and version 3.
Software is part of mobotware using the name 'drone_ctrl'.
Motor test app
A motor test GUI is available (in the motortest_gui directory) - it will talk to the motortest firmware - and there is no need for the prop-shield for this application.
Motor test GUI. There is the possibility to log time performance (in the log tab), to test run an ESC (or up to 6 ESCs) in the data tab.
The hardware configuration and pin-out are described in the hardware section above.
Drone test app
@todo
