Access from PC

Back to Robobot

From a linux PC

Get filesystem on normal Linux PC

From another (Linux) PC, mount the raspberry filesystem

mkdir rpi  (where the filesystem will be mounted)
sshfs local@10.59.8.141: rpi    (replace IP number with inet address from above, or use sshfs local@hostnale.local: rpi)

Then in directory rpi the user files on the raspberry can be manipulated.

for other access, use (with IP address as found above, or IP replaced with hostname.local)

ssh -X local@10.59.8.141

Before you reboot the Raspberry you should unmount the

umount rpi

Using Samba

This allows a Windows PC to see the Raspberry files as a network drive

On the Raspberry with internet access

install Samba

sudo apt install samba

Edit configuration

 sudo nano /etc/samba/smb.conf

Change workgroup to the workgroup of your windows Find your workgroup in "properties" for "my PC"

Change here:

[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
  workgroup = workgroup
  wins support = yes

At the end of the share directory

[robobot]
       comment = Pi Shared Folder
       path = /home/local
       browsable = yes
       guest ok = yes
       writable = yes

This adds the share with no security - which is much the easiest way

Then allow the home directory to be modified from the share (a+w is "all allowed to write")

sudo chmod a+w /home/local

Reboot to take effect

sudo reboot

Once it is back online, then from your windows (or Linux and maybe Apple) go to the file browser and networks, after an update the Raspberry should appear, and all the files in the home directory of user "local" should be visible and editable.