Terrain hopper steering: Difference between revisions

From Rsewiki
No edit summary
No edit summary
Line 1: Line 1:


Overview of new steering proposal
Back to [[terrain-hopper]]
 
==CAD drawings==
 
See https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130
 
==Overview of new steering proposal==


[[File:off-the-shelf-parts.png | 600px]]
[[File:off-the-shelf-parts.png | 600px]]

Revision as of 07:53, 10 February 2019

Back to terrain-hopper

CAD drawings

See https://cad.onshape.com/documents/97c36fb21a7a858c57c0af9f/w/0d867586bc28d7a9194d7ff3/e/ca0f539fa3eee3cfe0ed4130

Overview of new steering proposal

Figure 1. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the off-the-shelf parts used.


Figure 2. New steering part maintaining original steering axle position, but replacing with bearings and a belt drive to a maxon gear motor. This figure points to most of the parts that needs workshop assistance. Most of the parts - except axlesl (7 and 8) - can be manufactored on own workshop. The axles will be manufactored by axle supplier.