ESC calibration: Difference between revisions

From Rsewiki
(Created page with "Back to Drone control")
 
No edit summary
Line 1: Line 1:
Back to [[Drone control]]
Back to [[Drone control]]
== ESC calibration ==
The ESC used her is
* Hobbywing 40A 3-6 Lipo cell controller.
Manual is here: https://cdn.shopify.com/s/files/1/0109/9702/files/User_s_Manual_Xrotor-en.pdf?7945784144032874852
The calibration instructions are as in this figure, but use the GUI to set the ranges right.
[[File:ESC-calibration-from-manual.png | 600px]]
Basic calibration instructions, but replace stick with GUI based calibration.
== Gui based ESC calibration ==
NB!
* Remove propellers.
* Disconnect battery
With the controller connected to the PC, set manual motor value to 1000, as shown below:
[[File:esc-calibration-max-stick-gui.png | 600px]]
Set to max

Revision as of 13:49, 2 December 2020

Back to Drone control

ESC calibration

The ESC used her is

  • Hobbywing 40A 3-6 Lipo cell controller.

Manual is here: https://cdn.shopify.com/s/files/1/0109/9702/files/User_s_Manual_Xrotor-en.pdf?7945784144032874852

The calibration instructions are as in this figure, but use the GUI to set the ranges right.

Basic calibration instructions, but replace stick with GUI based calibration.

Gui based ESC calibration

NB!

  • Remove propellers.
  • Disconnect battery

With the controller connected to the PC, set manual motor value to 1000, as shown below:

Set to max