Regbot: Difference between revisions

From Rsewiki
No edit summary
Line 30: Line 30:
[[Software installation]] on REGBOT (Arduino) and tool-chain - Linux
[[Software installation]] on REGBOT (Arduino) and tool-chain - Linux


== Old stuff below ==
[[Regbot old stuff]]
 
==Install==
 
[[Regbot GUI]] install REGBOT GUI on Windows and Linux.
 
 
== Use ==
 
 
==Maintenance ==
 
 
REGBOT comes in 3 versions:
* version 2B - with extension boards to match version 3
* version 3  - configuration with (almost) all on one board ([[REGBOT version 3]] technical notes)
* version 4.1- using Teensy 3.5 ([[Regbot version 4]])
* version 5.1- using Teensy 4.1 ([[Regbot version 5]])
 
==Info==
 
[[Design overview]] can be found here.
 
Video presentation https://www.youtube.com/watch?v=mOz4eNkjTM0
 
REGBOT design sketch https://cad.onshape.com/documents/f14415feea0d8731f084d070/w/e9bf714402f35ee217c58672/e/c64e392bfa5890fe6ebcffad
 
== Old stuff ==
 
[[REGBOT archive]] - older REGBOT pages.

Revision as of 13:21, 7 December 2023

REGBOT is a small robot designed for exercises for our linear control course (PID control) (author).

Figur 1. Version 2 of Regbot.

Overview

This section is intended for users.

Getting started with REGBOT GUI.

User interface, how to configure the robot using the Regbot client.

Control overview gives some information on control possibilities.

Mission, how to write a mission.

Regbot maintenance for longer life.

Regbot calibration for better performance.

Install notes

This section is primarily installation notes and more detailed descriptions not usually needed by the end-user.

Regbot command interface - command list.

Software installation on REGBOT (Arduino) and tool-chain - Linux

Regbot old stuff