24V switch

From Rsewiki
Revision as of 10:45, 14 October 2018 by Jca (talk | contribs)

Switch - intended for a 24V motor with no more than 3-4A continuous current

The box has a microprocessor controllable with a simple set of commands.

power on
power off
power
help

"help" shows the list of commands, when using e.g. putty as a client.

"power" without parameter returns current setting as

"# power is 0\n" or 
"# power is 1\n"

The schematic is as in figure 1.

Figure 1. Schematics for 24V switch. The teensy is a 3.2 (the pin layout is here for a teensy 3.5). The MOSFET is mounted on the PCB, but 1W (5A) should be OK. The fuse is an automotive-fuse, that could be replaced with 10A if close to 5A use.