UASTA
From Rsewiki
Installations
...
Usage
uASTA with Loco Positioning System (ultra-wide band)
N = number that identifies your Crazyflie
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink
uASTA with Optitrack (motion capture system)
N = number that identifies your Crazyflie
- Start a ROS server for your Crazyflie:
cfstart N
- Check the current level of the battery (it should be above 3.8):
battery
- Start an Optitrack server for you Crazyflie:
optitrack N
Troubleshooting: the markers mounted on your Crazyflied have to be registered as a rigid body called cfN (e.g., cf12) on the Optitrack computer in the central cabin. See ASTA_motion_capture for more information.
- Check that the position estimate is stable in RViZ:
rviz
- Run you code in Simulink