Installation in windows
Installation i windows
Klientprogram
Windows
Der skal installeres
- Installation af driver https://www.pjrc.com/teensy/td_download.html - seriel driver installation med https://www.pjrc.com/teensy/serial_install.exe
Klienten er en Python2.7 (QT4/5) applikation, som kræver
- Installation af python - version 2.7 fra https://www.python.org/downloads/windows/
- installation af QT4 GUI library - fra http://www.riverbankcomputing.co.uk/software/pyqt/download.
Installation af http://sourceforge.net/projects/pyqt/files/PyQt4/PyQt-4.11.3/PyQt4-4.11.3-gpl-Py2.7-Qt4.8.6-x32.exe NB! det skal være QT4 og x32 (ikke x64) og der skal indgå 'Py2.7' i filnavnet (eller sammenhæng mellem Python version og PyX.X i QT4 filnavnet.
- installation af python seriel kommunikation fra https://pypi.python.org/pypi/pyserial - igen skal version passe med Python, i.e. 2.7.
Installeres bedst fra kommadolinien med
pip install pyserial
To make python exe file
To pack an application to an exe-file for windows.
Install from cmd line
pip install pyinstaller
If you then try
pyinstaller Error: Pyinstaller for Python 2.6+ needs pywin32 ...
Then go to http://sourceforge.net/projects/pywin32/?source=typ_redirect then the link "browse all files"-> "pywin32" -> "build..." and find pywin32-XXX-win32-py2.7.exe
Run this installation
Prepare installation as an EXE file
install pyinstaller use pip (python installer) som installeres sammen med python 2.7
Use pyinstaller ... @todo
Linux (debian based)
- install python
sudo apt-get install python-dev sudo apt-get install pyqt5-dev
If python version 3 is used, then further packages are needed, and some code may have to change.
Teensy 3.1 code
To compile code to Teensy 3.1, and download to the robot requires a bit more
- Code loader - see https://www.pjrc.com/teensy/loader.html - Code uses an arduino library, but is written in C (compiled with a C++ compiler), this requires further installation: @todo - see Nilas' report.
