User interface

From Rsewiki
Revision as of 15:14, 2 January 2016 by Jca (talk | contribs) (Created page with "File:Gui_rev0.png The GUI allows to make step responses for velocity and turn. The step response is recorded in a buffer on the robot and is fetched in a MATLAB style fil...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The GUI allows to make step responses for velocity and turn. The step response is recorded in a buffer on the robot and is fetched in a MATLAB style file (as shown). Interface points that are recorded can be switched on and off to better utilize the limited buffer size on the robot (35kBytes).

This is a page to make a step response and insert controller values for velocity control. The same controller is used for both wheels.