Drone motor test app

back to Drone control

Configuration and test app

The app is intended to configure, measure and test the drone (inner) flight-controller.

It is written with Qt5 and python

It runs with python 2.7++ and version 3.

Software is part of mobotware using the name 'drone_ctrl'.

Motor test app

A motor test GUI is available (in the motortest_gui directory) - it will talk to the motortest firmware - and there is no need for the prop-shield for this application.

Motor test GUI. There is the possibility to log time performance (in the log tab), to test run an ESC (or up to 6 ESCs) in the data tab.

The hardware configuration and pin-out are described in the hardware section above.

Drone test app

@todo