Network setup

From Rsewiki
Revision as of 09:28, 24 December 2021 by Jca (talk | contribs) (Created page with "Back to Robobot === Packages to install === Install: ntp ntpdate openssh-server git libreadline-dev sudo apt install ntp ntpdate openssh-server git libreadline-d...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Back to Robobot

Packages to install

Install:

ntp
ntpdate
openssh-server
git
libreadline-dev

sudo apt install ntp ntpdate openssh-server git libreadline-dev

Install ros-melodic-desktop-full, follow instructions in: http://wiki.ros.org/melodic/Installation/Ubuntu up to section 2. Tutorials.

NTP

Network time protocol, to keep clocks in sync. At DTU most clock sources are blocked, the clock source needs to be configured.

At DTU, edit /etc/ntp.conf, add ntp.ait.du.dk to server pool

...
# Use servers from the NTP Pool Project. Approved by Ubuntu Technical Board
# on 2011-02-08 (LP: #104525). See http://www.pool.ntp.org/join.html for
# more information.
pool ntp.ait.dtu.dk
...

Sync time

sudo ntpdate -u ntp.ait.dtu.dk

Should work in and around DTU - see also NTP howto for more details.