Regbot version 5

From Rsewiki
Revision as of 11:27, 1 November 2022 by Jca (talk | contribs) (→‎Error list)

Back to Regbot

Info about Regbot PCB, diagram and plugs.

Base board

PCB layout (Version 5.1 has minor changes only)

Schematic

Schematic of version 5.0 (a few mods for version 5.1)

Error list

  • 5V and 12V PCB sockets, here the silk-screen indicates a wrong orientation.
  • The motor encoder delivers 5V for the encoder signals, Teensy 4.1 is not 5V tolerant (but the output is open-collector with 10kOhm to 5V, so should be OK).