Install GUI-less UBUNTU

From Rsewiki
Revision as of 12:21, 19 January 2012 by Jca (talk | contribs) (New page: ===Introduction=== This guide is a guide to install UBUNTU on a robot without GUI. Further to install mobotware, and connect the logon and home directory to the AU server (kalman). ===UB...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

This guide is a guide to install UBUNTU on a robot without GUI.

Further to install mobotware, and connect the logon and home directory to the AU server (kalman).

UBUNTU installation

Disk space of at least 4GB is needed, internet access for use during installation and a connected CD-drive for the initial boot.

The installation follows in general the guidanve in: https://help.ubuntu.com/community/Installation/LowMemorySystems

Make a UBUNTU 11.10 minimal from the page https://help.ubuntu.com/community/Installation/MinimalCD Select the x86 32bit version (mobotware do not support 64bit yet)

Installed with the following selections: 

* Installed on entire disk (160GB and 2GB swap - swap should later be removed and disk image reduced to 4 or 8 GB)
* Language: English (UK)
* Time: UTM with local time beeing København

When asked got packages to install, installed is: 

* server basis
* ssh server

Then finish and reboot.

Retrieved from "https://rsewiki.electro.dtu.dk/index.php?title=Install_GUI-less_UBUNTU&oldid=975"