Flexbot parts list: Difference between revisions
From Rsewiki
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
* [https://www.pololu.com/product/2855 Pololu D24V22F12] - 24V to 12V voltage regulator | * [https://www.pololu.com/product/2855 Pololu D24V22F12] - 24V to 12V voltage regulator | ||
* [https://www.pjrc.com/store/teensy32.html Teensy 3.2] - μ-processor board. | * [https://www.pjrc.com/store/teensy32.html Teensy 3.2] - μ-processor board. | ||
* Connectors and headers for the electronics - to be determined later. | |||
===Mechanics=== | ===Mechanics=== | ||
| Line 39: | Line 40: | ||
* (link) - batteries (LiPo?) | * (link) - batteries (LiPo?) | ||
* (link) - USB hub (min. 8 ports) | * (link) - USB hub (min. 8 ports) | ||
Revision as of 09:56, 23 July 2017
Back to Flexbot main page
Parts list
This page should hold the complete parts list for Flexbot. When adding a new component, please update correspondingly.
Leg
Knee section
- DLA-12-20-A-250-HS2-ip65 - Transmotec actuator 12V, 500N, 25cm stroke, with magnetic encoder. Each encoder channel deliveres 13.8 transitions every mm, i.e. two channels delivers a transition every 0.0362mm. At 20V (0.8A no load) motor voltage (12V motor) the hall channel period is T=6.2ms => 23mm/s, at 12V (0.65A no load) T=10.2ms => 14.9mm/s. 12V full stroke 17 sek (25cm) = 14.7mm/s.
- Cytron 10A DC Motor Driver - model RB-Cyt-132
- MPU-9250/6500 - IMU
- Teensy 3.5 - μ-processor board
- Pololu D24V22F5 - 24V to 5V voltage regulator
- Connectors and headers for the electronics - to be determined later.
- - fjederben
Foot
- Firgelli L12-50-210-12-l - steering actuator (12V) 5cm stroke, with controller
- IG42CR0024x00020R - 24V drive motor with 20 pulse encoder
- TE-098-110 - SyRen 10A motor driver (24V)
- as5047 - angle encoder for damper position
- Pololu D24V22F5 - 24V to 5V voltage regulator
- Pololu D24V22F12 - 24V to 12V voltage regulator
- Teensy 3.2 - μ-processor board.
- Connectors and headers for the electronics - to be determined later.
Mechanics
- FIDRacing DBXL front hub (FIDXL032) steering parts, including axle (but no wheel nut)
- RovalLosi LT Wheel nut
- RovanLosi LT tyre inner foam
- -tire?
- (link) - flex coupling between motor and wheel
- (link) - 6mm axle
Body
- (link) - main PC (Intel Nuc i7?)
- (link) - batteries (LiPo?)
- (link) - USB hub (min. 8 ports)
