Install on raspberry

Short note on installation of (parts of) mobotware on Raspberry Pi

Prerequisite

First install 2012-10-28-wheezy-raspbian on the raspberry Pi flashdisk and expand the flash-disk to at least 4GB - see the instructions on http://elinux.org/RaspberryPiBoardBeginners

Assuming this is up and running - with internet access

Packages needed

The following packeges needs to be installed - e.g. using apt-get like:

sudo apt-get install subversion

Package list:

subversion  (to fetch mobotware from SVN)
libexpat-dev   (RHD)
pciutils-dev   (RHD)
libncurses-dev (RHD)
bison          (MRC)
libsdl-dev     (MRC)
telnet         (MRC test)

Get and unpack mobotware - you need the following directories only:

mobotware/aumat
mobotware/mrc
mobotware/rhd
mobotware/build

The rest of the directories can be deleted, so can rhd/branches

Build

Build the needed parts of mobotware, e.g.:

cd ~/mobotware/aumat/trunk
make
cd ../../rhd/trunk
make
cd ../../mrc/trunk
make

In this order

Then collect the configuration and binary files in a test directory

Test

make a test directory and fill it with the needed configuration and binary files, e.g.

mkdir live
cd live
cp -r ~/mobotware/build/config/ROBOT_TYPE/* .
ln -s ~/mobotware/rhd/trunc/build/bin/rhd .
ln -s ~/mobotware/rhd/trunk/build/bin/rhdtest .
ln -s ~/mobotware/mrc/trunk/mrc/mrc .
echo "" >calib/wdssparam.dat

You now need to modify the rhdconfig.xml file: Change the path to plugins, using e.g. nano

nano -w rhdconfig.xml

Change the line (assuming you use the default pi user)

from: <plugins basepath="/usr/local/smr/lib/rhdplugin/">
to:   <plugins basepath="/home/pi/mobotware/rhd/trunk/build/lib/rhdplugin/">

In the rhdconfig.xml there is already a number og plugins, this list need to be updated to your configuration.

To test if the RHD is running you may just change the attribute critical="true" to critical="false", the RHD will then continue even if the plugin fails to initialize. If some plugin is not found - e.g. maestro12ch.so.1 (it is not compiled by default) - then delete it from the rhdconfig.xml file, or change enable="true" to enable="false" for this plugin.

The file calib/robot.conf needs update too. You may use the configuration files in mobotware/build/config for inspiration

Now start the RHD (in the live directory):

./rhd

It should end by saying "RHD is running", else check the rhdconfig.xml as above.

OPen a new terminal tab and run rhdtest to see if it is alive:

./rhdtest

And type

connect

You should now see a list of variables, where at least the Tick is updating.

Stop the rhdtest with ctrl-c

MRC test

Start the MRC (while the RHD is running) using socket interface:

./mrc -t1

In another terminal window use telnet to connect to the MRC

telnet localhost 31001

MRC commands like

eval $time

Should now be avilable

If all this is OK, then the raspberry Pi is running, and you only need to connect it to your robot througt an appropriate set of rhd plug-ins and make a MRC script to make it run.

Performance

The RHD and MRC running in idle with an update rate of 100 HZ is consuming about 3-4% CPU load each.