Robobot hardware: Difference between revisions
From Rsewiki
(Created page with "Back to Robobot B ==Hardware== 400px The hardware is 3D-printed plastic (except for the electronics and screws) All 3D printed parts...") |
|||
| Line 7: | Line 7: | ||
The hardware is 3D-printed plastic (except for the electronics and screws) | The hardware is 3D-printed plastic (except for the electronics and screws) | ||
All 3D printed parts have holes for mounting additional parts. These holes | All 3D printed parts have holes for mounting additional parts. These holes have: | ||
* Individual distance of 1cm | * Individual hole distance of 1cm | ||
* | * Hole diameter of 2.5mm, intended for 3mm plastic screws. | ||
* Plastic thickness is 6mm in most cases. | * Plastic thickness is 6mm in most cases. | ||
Revision as of 11:36, 22 October 2023
Back to Robobot B
Hardware
The hardware is 3D-printed plastic (except for the electronics and screws)
All 3D printed parts have holes for mounting additional parts. These holes have:
- Individual hole distance of 1cm
- Hole diameter of 2.5mm, intended for 3mm plastic screws.
- Plastic thickness is 6mm in most cases.
