Robobot hardware

From Rsewiki
Revision as of 11:36, 22 October 2023 by Jca (talk | contribs) (Created page with "Back to Robobot B ==Hardware== 400px The hardware is 3D-printed plastic (except for the electronics and screws) All 3D printed parts...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Back to Robobot B

Hardware

The hardware is 3D-printed plastic (except for the electronics and screws)

All 3D printed parts have holes for mounting additional parts. These holes has:

  • Individual distance of 1cm
  • Whole diameter of 2.5mm, intended for 3mm plastic screws.
  • Plastic thickness is 6mm in most cases.
Retrieved from "https://rsewiki.electro.dtu.dk/index.php?title=Robobot_hardware&oldid=6445"