All public logs

Combined display of all available logs of Rsewiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 15:36, 12 February 2025 Jca talk contribs created page Regbot first setup (Created page with "Back to Regbot == Initial settings == After a "factory reset", a few settings are needed. Assuming that the robot is connected using the USB cable. The Regbot GUI is running and connected to the robot. I.e. robot time and name is updated. === ID === The ID must match the robot. If not, go to the "Robot" tab. Press Edit, change the ID, press "Apply" and after that "Save to flash". The other settings should be: * Hardware: 9 * Wheel base: 0.15 (m) - measure is...")