Robobot hardware

From Rsewiki

Revision as of 11:36, 22 October 2023 by Jca (talk | contribs) (→‎Hardware)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Back to Robobot B

Hardware

The hardware is 3D-printed plastic (except for the electronics and screws)

All 3D printed parts have holes for mounting additional parts. These holes have:

Individual hole distance of 1cm
Hole diameter of 2.5mm, intended for 3mm plastic screws.
Plastic thickness is 6mm in most cases.

Retrieved from "https://rsewiki.electro.dtu.dk/index.php?title=Robobot_hardware&oldid=6446"