Robobot 2

From Rsewiki

Revision as of 13:44, 16 January 2025 by Jca (talk | contribs) (→‎Fail to connect)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Back to Robobot

Network Access

Install Putty

Putty is the recommended SSH client (see e.g. https://en.wikipedia.org/wiki/Comparison_of_SSH_clients).

Install Putty and connect to the IP address on the small robot display.

Once connected, you have a command line control of the Raspberry Pi.

Fail to connect

If there is no IP on the robot, then consult Network_setup.

Retrieved from "https://rsewiki.electro.dtu.dk/index.php?title=Robobot_2&oldid=7514"