Robobot packing list: Difference between revisions
From Rsewiki
(Created page with "Back to Robobot == 2026 packing list == * Robot with ** Base PCB version 8.5 ** Raspberry Pi version 4 or 5 ** SD-card with base image (updated per 29 jan 2026) ** Raspberry Pi camera version 2.1 ** Servo Savox - version SA-1230SG - with horn for high torque * Battery 2.2Ah Lipo 3 cells - XT60 plug. * Charger (new 1.5A) ** 230V cable for charger * Japcell power supply 15V 6A with XT60 plug ** 230V cable for power supply * Small servo XWAVE X9MG * Extend...") |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Back to [[ | Back to [[Robobot_B | Robobot]] | ||
== 2026 packing list == | == 2026 packing list == | ||
* | * Grey labelled box with robot, including: | ||
** Raspberry Pi version 4 or 5 | ** Raspberry Pi version 4 or 5 | ||
** SD-card with base image (updated per 29 | ** SD-card with base image (Raspbian 64-bit Trixie, updated per 29 Jan 2026) | ||
** Raspberry Pi camera version 2.1 | ** Raspberry Pi camera version 2.1 | ||
** Servo Savox - version SA-1230SG - with horn for high torque | ** Servo Savox - version SA-1230SG - with horn for high torque | ||
* | ** Base PCB (Green, version 8.5) with Teensy version 4.1 | ||
** IMU board (MPU9250) | |||
** IO board with start/stop button, version 230905 | |||
** Line sensor PCB (Yellow, version 3.1) | |||
** Cables to all devices, including | |||
*** USB-2 micro to A, 50cm - Teensy to Raspberry | |||
*** Cables to lit fastened to avoid stress. | |||
* Two batteries 2.2Ah Lipo 3 cells - XT60 plug. | |||
* Charger (new 1.5A) | * Charger (new 1.5A) | ||
** 230V cable for charger | ** 230V cable for charger | ||
Latest revision as of 14:53, 29 January 2026
Back to Robobot
2026 packing list
- Grey labelled box with robot, including:
- Raspberry Pi version 4 or 5
- SD-card with base image (Raspbian 64-bit Trixie, updated per 29 Jan 2026)
- Raspberry Pi camera version 2.1
- Servo Savox - version SA-1230SG - with horn for high torque
- Base PCB (Green, version 8.5) with Teensy version 4.1
- IMU board (MPU9250)
- IO board with start/stop button, version 230905
- Line sensor PCB (Yellow, version 3.1)
- Cables to all devices, including
- USB-2 micro to A, 50cm - Teensy to Raspberry
- Cables to lit fastened to avoid stress.
- Two batteries 2.2Ah Lipo 3 cells - XT60 plug.
- Charger (new 1.5A)
- 230V cable for charger
- Japcell power supply 15V 6A with XT60 plug
- 230V cable for power supply
- Small servo XWAVE X9MG
- Extender cable for small servo - with PSU protect diode and capacitor.
