Robobot packing list
From Rsewiki
Back to Robobot
2026 packing list
- Grey labelled box with robot, including:
- Raspberry Pi version 4 or 5
- SD-card with base image (Raspbian 64-bit Trixie, updated per 29 Jan 2026)
- Raspberry Pi camera version 2.1
- Servo Savox - version SA-1230SG - with horn for high torque
- Base PCB (Green, version 8.5) with Teensy version 4.1
- IMU board (MPU9250)
- IO board with start/stop button, version 230905
- Line sensor PCB (Yellow, version 3.1)
- Cables to all devices, including
- USB-2 micro to A, 50cm - Teensy to Raspberry
- Cables to lit fastened to avoid stress.
- Two batteries 2.2Ah Lipo 3 cells - XT60 plug.
- Charger (new 1.5A)
- 230V cable for charger
- Japcell power supply 15V 6A with XT60 plug
- 230V cable for power supply
- Small servo XWAVE X9MG
- Extender cable for small servo - with PSU protect diode and capacitor.
