Robobot circuits: Difference between revisions
From Rsewiki
No edit summary |
|||
| Line 41: | Line 41: | ||
== Raspberry PI == | == Raspberry PI == | ||
[[File:Raspberry_Pi_GPIO_pins.png]] | [[File:Raspberry_Pi_GPIO_pins.png | 600px]] | ||
Figure 5. GPIO pin numbers. | Figure 5. GPIO pin numbers. | ||
Revision as of 16:12, 27 December 2023
Back to Robobot_B
Digital IO
Circuit diagram
Figure 1. The circuit diagram should ensure that each IO pin can function as both input and output. If input, then the pin has active pull down, i.e. for input to change, it must be pulled high, to at least 3.3V, but 5 or 12V will work too. If output, then a transistor is active when output is high, and can draw at least 1A from the 12V supply. The 5V and 3.3V can supply no more than 100mA.
PCB
Figure 2. The PCB layout for the digital IO circuit.
Regbot
Circuit diagram
Figure 3. The Regbot circuit.
PCB - 3D view
PCB
Figure 4. Ecpected view of PCB.
Figure 5. PCB with more trace details.
Raspberry PI
Figure 5. GPIO pin numbers.
