Robobot B: Difference between revisions
From Rsewiki
| Line 17: | Line 17: | ||
** [[Robobot 4 | Python control]] | ** [[Robobot 4 | Python control]] | ||
** [[Robobot 5 | Firmware tools]] | ** [[Robobot 5 | Firmware tools]] | ||
* [[Robobot architecture | | * [[Robobot architecture | System overview]] and blocks description. | ||
* [[Raspberry Pi directory structure for Robobot | Network access]] | * [[Raspberry Pi directory structure for Robobot | Network access]] | ||
* [[Robobot and MATLAB]] use of logfiles. | * [[Robobot and MATLAB]] use of logfiles. | ||
Revision as of 13:18, 17 January 2025
Robobot B is a simplified (2024) version of the old Robobot
Robobot
Overview
This section is intended for users.
- Getting started
- System overview and blocks description.
- Network access
- Robobot and MATLAB use of logfiles.
- Robobot hardware items.
- Robobot circuits
- Robobot webcam server
- Robobot teensy interface
- Robobot teensy firmware
- Start button to start mission, see Enable autostart
Developers notes
This section has notes on the development of the robot.
- Robobot install on Raspberry
- DTU network and time setup: Network setup
- Robobot base software installation
- Enable autostart and IP display
Arduino firmware - one of these:
- Installation of Arduino and Teensy libraries when using the Arduino IDE.
- Installation of Visual Studio Code when working on a standard PC. NB! missing the platformio.ini @todo
- installation of Command line support for use on the Raspberry Pi.
On-line help page from Teensy_firmware_8
Older pages
- Old robobot, instructions are mostly deprecated
- Some architecture notes Robobot Teensy interface.
- Software description and examples.
