Robobot B

Robobot B is a simplified (2024) version of the old Robobot

Robobot

Overview

This section is intended for users.

• Getting started
  • Battery power and shut down
  • Network access
  • Software update
  • Camera view
  • Python control
  • Firmware tools
• Software overview and blocks description.
• Network access
• Robobot and MATLAB use of logfiles.
• Robobot hardware items.
• Robobot circuits
• Robobot webcam server
• Robobot teensy interface
• Start button to start mission, see Enable autostart

Developers notes

This section has notes on the development of the robot.

• Robobot install on Raspberry
• DTU network and time setup: Network setup
• Robobot base software installation
• Enable autostart and IP display

Arduino firmware - one of these:

• Installation of Arduino and Teensy libraries when using the Arduino IDE.
• Installation of Visual Studio Code when working on a standard PC. NB! missing the platformio.ini @todo
• installation of Command line support for use on the Raspberry Pi.

On-line help page from Teensy_firmware_8

• Help page Teensy_8

Older pages

• Old robobot, instructions are mostly deprecated
• Some architecture notes Robobot Teensy interface.
• Software description and examples.