Robobot B

Robobot 2025 is a robot platform for innovative applications, especially the annual DTU Robocup competition.

Robobot 2025

Overview

This section is intended for users.

• Getting started
  • Battery power and shut down
  • Network access
  • Software update
  • Camera view
  • Python control
  • Firmware tools
• System description
  • System overview and top-level blocks description.
  • Robobot MQTT-client
  • Robobot webcam server
  • Robobot teensy interface
  • Robobot teensy firmware
• Further details
  • Start button to start mission, see first part of Enable autostart
  • Robobot and MATLAB use of logfiles.
  • Network access, file share and directory structure.
  • Robobot hardware items. Motors, sensors, plastic and screws.
  • Robobot circuits, PCB and circuit diagrams

Developers notes

This section has notes on the installation of the robot.

• Robobot install on Raspberry
• DTU network and time setup: Network setup
• Robobot base software installation
• Enable autostart and IP display

Arduino firmware - one of these:

• Installation of Arduino and Teensy libraries when using the Arduino IDE.
• Installation of Visual Studio Code when working on a standard PC. NB! missing the platformio.ini @todo
• installation of Command line support for use on the Raspberry Pi.

• Help page Teensy_8 from on-line command help.
• Robobot processor initialize setup

Older pages

• Old robobot instructions are mostly deprecated
• Some architecture notes Robobot Teensy interface.
• Software description and examples.